I have begun testing the WL-5470POE indoor unit to become more familiar with the setup and I so far have found it very easy to setup and is doing all the things expected as described in their instructions manual. So rather than posting a whole bunch of screen grabs, here is the WL-5470POE Manual (6.1Mb). Which leaves me to just tell you about the areas of interest.
Although the site survey tool may appear privative it does give a dynamic signal level once an SSID is selected. The receiver sensitivity is quite high and the site survey tool can be used in all modes e.g. AP and Bridge mode which is quite helpful. It also has the added feature of being able to change receive sensitivity also available in all modes. These features in combination with adjustable output power also adjustable in all modes makes a refreshing difference.
Note this site survey was done inside my office using a 2db antenna the SSID “Air-Stream-Bedford-Park” AP is very Non-LOS 600 Metres away it goes through a wall, carpark, trees, a building and a busy Road.
Next test is in a high interference area, using an external antenna at Myrtle Bank.
